Colour

Certification

Collections

Flame resistant collection

Function

Hi-vis co-certification

Hi-vis classification

Lining

Material

Type of garment

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

NEW!

NEW COLOUR!

Comfortable, flexible and durable 4-way stretch. Good washing abilities. The fibre is partially bio-based, which contributes to reducing the climate footprint

Light fabric with a good stretch function for comfort in warm climates.

Lighter cotton quality with stretch. Provides comfort, protects against dirt and splashes and provides good mobility in the garment. Suits well in industry and service.

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Inherent flame resistant fabric, good protection level, designed for environments with demands on high-vis orange, with FR polyester, PFAS free. Certifications: EN ISO 11611, EN ISO 11612, EN 1149, EN 61482-1-1, EN 61482-1-2

Flame resistant fabric, heavy duty and flexible, for welding class 2, PFAS free.  Certifications:  EN ISO 11611, EN ISO 11612, EN 1149, EN 61482-1-1, EN 61482-1-2, EN 13034, EN ISO 20471, RIS-3279-TOM

Lightweight 4-waystretch that is both comfortable and durable.

Built for pace and visibility. The main fabric is a comfortable, flexible and durable 4-way stretch that delivers all-day comfort, while ventilating mesh panels at the knees and yoke help you keep the right temperature when work ramps up. 
The ToolRig™ rail runs 360° around the waist, letting you move pockets and accessories freely. ToolRig™ tool pockets and a hammer holder bracket are included, and they are detachable, which is ideal when switching tasks. For heavier rigs, the trousers feature loops for ToolRig™ braces/harness for better ergonomics and load management. 
Knee work stays comfortable and secure with kneepad pockets in reinforced CORDURA® stretch. Storage is generous with extra-wide tool pockets, CORDURA® reinforcements where wear is highest and a raised back waist that keeps you covered in motion. Segmented reflective tape makes sure you are seen when it matters most.
<ul>
<li>Comfortable, flexible and durable 4-way stretch</li>
<li>Ventilating mesh panels at knees and yoke</li>
<li>ToolRig™ rail 360° around the waist – move pockets and accessories freely</li>
<li>ToolRig™ tool pockets and hammer holder bracket included</li>
<li>Loops for ToolRig™ braces/harness for better ergonomics and load management</li>
<li>Kneepad pockets in reinforced CORDURA® stretch</li>
<li>Raised back waist</li>
<li>CORDURA®-reinforced tool pockets</li>
<li>Segmented reflective tape</li>
</ul>

ToolRig™ Hi-Vis Trousers 4-Way Stretch

Industrial and service trousers in lightweight 2-way stretch, made from a cool, durable and flexible fabric that blends polyester, cotton and elastomultiester – a stretch fibre that withstands higher washing temperatures while providing enhanced comfort throughout the working day. 
The trousers feature pre-bent legs for optimal comfort and are completely scratch and metal-free, making them particularly well-suited for industrial environments with strict safety requirements. Suitable for industrial laundering.
Also available in women's model 7011.

Trousers Stretch

Built for indoor environments and mobile work. The main fabric is a light 2-way stretch that breathes and stays comfortable as temperatures rise, while 4-way stretch panels at seat, knees and crotch follow every move without holding you back. 
The ToolRig™ rail runs 360° around the waist, letting you move pockets and accessories freely. This service trouser is delivered without tool pockets, so add ToolRig™ tool pockets and ToolRig™ Sliders if you want to build your own rig. 
Details are tuned for workflow, including a pen and knife pocket designed for both right- and left-handed users, and a leg pocket with internal mesh phone pocket that keeps the mobile secure and easy to reach. Pre-shaped knees for increased mobility and comfort during kneeling work.
<ul>
<li>Light 2-way stretch for comfort in warm environments</li>
<li>4-way stretch panels at seat, knees and crotch for extra mobility</li>
<li>ToolRig™ rail 360° around the waist – move pockets and accessories freely</li>
<li>Add ToolRig™ tool pockets if needed</li>
<li>Pen and knife pocket for right- and left-handed users</li>
<li>Leg pocket with internal mesh phone pocket</li>
<li>Pre-shaped knees for increased mobility and comfort</li>
</ul>

ToolRig™ Service Trousers Stretch

Work close to materials, machinery and finished surfaces without worry. These industrial trousers are made in 2-way stretch that delivers comfort, mobility and protection from dirt and splashes. A scratch-free construction with concealed buttons and zips means you do not damage sensitive surfaces. 
The trousers are tested to EN ISO 15797 and suitable for industrial laundering, so they handle tough daily routines again and again. Pre-shaped knees for increased mobility and comfort during kneeling work, kneepad pockets for protection, and fixed tool pockets keep order. An elasticated waist boosts comfort. A reflective detail on the legs adds visibility when the light drops.
<ul>
<li>Cotton canvas with 2-way stretch for comfort, mobility and protection from dirt and splashes</li>
<li>Scratch-free design with concealed buttons and zips</li>
<li>Elasticated waist</li>
<li>Tested for industrial laundering to EN ISO 15797</li>
<li>Pre-shaped knees for increased mobility and comfort during kneeling work</li>
<li>Kneepad pockets</li>
<li>Fixed tool pockets</li>
<li>Reflective detail on the legs</li>
</ul>

Industrial Trousers Stretch

Multinorm trousers in inherent flame-resistant material, built for work where the risks are higher and the demands are clear. The combination of a durable outer fabric and a thin lining on the front of the trousers gives the trousers APC 2, the higher protection class for electric arc. 
The material is soft, flexible and durable, with the flame resistance built into the fibre. The reinforcement material on the knees provides extra durability where it is needed most, while well-thought-out pocket solutions keep the essentials close at hand. The fabric has ripstop functionality, which makes it more durable and increases tear resistance. 
The trousers are developed to perform in demanding environments, with a focus on safety, durability and function. They are also free from metal components and PFAS. 
Certified to EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, EN 61482-2 – protection against thermal hazards of an electric arc, EN 14404 – protection for work in a kneeling position, EN ISO 20471 – high visibility, OEKO-TEX® Standard 100 – tested for harmful substances.

APC 2 Multinorm Inherent Trousers

An ideal work trouser with high comfort for those working in exposed environments. Equipped with hanging pockets and smart details such as stretch panels for increased mobility and flexibility. The trouser is made in an inherent flame-resistant material. 
The dirt- and water-repellent fabric has high durability, CORDURA®/Kevlar®/Protal® reinforcement at the knees, ruler and knife pocket and leg pocket with space for a phone. 
Metal-free, PFAS-free and approved for industrial laundering at 60°C. Developed to function safely and reliably in ATEX-classified environments. 
Certified to EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, IEC 61482-2 – protection against thermal hazards of an electric arc, EN ISO 20471-1 – high visibility, EN 14404 – protection for work in a kneeling position, OEKO-TEX® Standard 100 – tested for harmful substances. 
Also available as women’s model 71851524.

Multinorm Inherent Trousers Stretch

Trousers with very good properties in relation to their weight. The fabric is inherent, which means the flame resistance is built into the fibre structure. The trousers are equipped with knee reinforcement in CORDURA®/Kevlar®/Protal®. 
They have many smart pocket solutions adapted to the certification requirements. For increased service life, exposed pockets are reinforced with double fabric. This is a metal-free model with plastic components. 
PFAS-free and approved for industrial laundering at 60°C. Developed to function safely and reliably in ATEX-classified environments. 
Certified to EN ISO 11611 – protection for welding and similar processes, EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, IEC 61482-2 – protection against thermal hazards of an electric arc, EN 14404 – protection for work in a kneeling position, EN ISO 20471-1 – high visibility, OEKO-TEX® Standard 100 – tested for harmful substances. 
Also available as women’s model 71881524.

Multinorm Inherent Trousers

Trousers with very good properties in relation to their weight. The fabric is inherent, which means the flame resistance is built into the fibre structure. Equipped with tool pockets, open ruler pocket, back pockets without flaps and knee reinforcement in CORDURA®/Kevlar®/Protal®. 
They have many smart pocket solutions adapted to the certification requirements. For increased service life, exposed pockets are reinforced with double fabric. This is a metal-free model with plastic components. 
PFAS-free and approved for industrial laundering at 60°C. Developed to function safely and reliably in ATEX-classified environments. 
Certified to EN ISO 11612 – protection against heat and flame, EN 61482-1 – protection against electric arc, EN 1149 – antistatic protection, EN 14404 – protection for work in a kneeling position, EN ISO 20471 – high visibility.

Multinorm trousers in inherent flame-resistant material, built for work where the risks are higher and the demands are clear. The combination of a durable outer fabric and a thin lining on the front of the trousers gives the trousers APC 2, the higher protection class for electric arc. 
The material is soft, flexible and durable, with the flame resistance built into the fibre. The reinforcement material on the knees provides extra durability where it is needed most, while well-thought-out pocket solutions keep the essentials close at hand. The fabric has ripstop functionality, which makes it more durable and increases tear resistance. 
The trousers are developed to perform in demanding environments, with a focus on safety, durability and function. They are also free from metal components and PFAS. 
Certified to EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, EN 61482-2 – protection against thermal hazards of an electric arc, EN ISO 11611 – protection for welding and allied processes, EN 13034 – protection against liquid chemical splashes, EN 14404 – protection for work in a kneeling position, EN ISO 20471 – high visibility, OEKO-TEX® Standard 100 – tested for harmful substances. 
Also available as women’s model 7289.

Trousers made from a durable inherent material with a light lining on the inside. This combination makes the trousers approved for APC 2, the higher protection class for electric arc. 
The model is equipped with many smart pocket solutions that are adapted to the certification requirements. CORDURA®/Kevlar®/Protal® reinforcement at the knees and double fabric in the pockets increases durability and service life. 
Metal-free, PFAS-free and approved for industrial laundering at 60°C. Developed to function safely and reliably in ATEX-classified environments. 
Certified to EN ISO 11611 – protection for welding and similar processes, EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, IEC 61482-2 – protection against thermal hazards of an electric arc, EN 13034 – protection against liquid chemical splashes, EN ISO 20471 – high visibility, OEKO-TEX® Standard 100 – tested for harmful substances. 
Also available as women’s model 72891524.

A dirt- and water-repellent work trouser with high comfort for those working in exposed environments. The fabric is inherent, which means the flame resistance is built into the fibre structure. Equipped with stretch panels for increased mobility and flexibility. 
The fabric has high durability. CORDURA®/Kevlar®/Protal® reinforcement on knee, ruler and knife pocket, reinforced tool pockets and leg pocket with space for a phone. Especially well suited for electricians and similar trades. 
Metal-free, PFAS-free and approved for industrial laundering at 60°C. Developed to function safely and reliably in ATEX-classified environments. 
Certified to EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, IEC 61482-2 – protection against thermal hazards of an electric arc, EN ISO 20471-2 – high visibility, EN 14404 – protection for work in a kneeling position, OEKO-TEX® Standard 100 – tested for harmful substances. 
Also available as women’s model 71451524.

Trousers Multinorm Inherent Stretch

Trousers with very good properties in relation to their weight. The fabric is inherent, which means the flame resistance is built into the fibre structure. The trousers feature knee reinforcement in CORDURA®/Kevlar®/Protal®. 
They have many smart pocket solutions adapted to the certification requirements. For increased service life, exposed pockets are reinforced with double fabric. This is a metal-free model with plastic components. 
PFAS-free and approved for industrial laundering at 60°C. Developed to function safely and reliably in ATEX-classified environments. 
Certified to EN ISO 11611 – protection for welding and similar processes, EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, IEC 61482-2 – protection against thermal hazards of an electric arc, EN 14404 – protection for work in a kneeling position, EN ISO 20471-2 – high visibility, OEKO-TEX® Standard 100 – tested for harmful substances. 
Also available as women’s model 71891524.

Trousers with very good properties in relation to their weight. The fabric is inherent, which means the flame resistance is built into the fibre structure. Equipped with tool pockets, open ruler pocket, back pockets without flaps and knee reinforcement in CORDURA®/Kevlar®/Protal®. 
They have many smart pocket solutions adapted to the certification requirements. For increased service life, exposed pockets are reinforced with double fabric. This is a metal-free model with plastic components. 
PFAS-free and approved for industrial laundering at 60°C. Developed to function safely and reliably in ATEX-classified environments. 
Certified to EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, IEC 61482-2 – protection against thermal hazards of an electric arc, EN 14404 – protection for work in a kneeling position, EN ISO 20471 – high visibility, OEKO-TEX® Standard 100 – tested for harmful substances.

Flame-resistant welding trousers with hi-vis details for increased visibility. The trousers have smart pocket solutions such as side pockets, ruler pocket and external kneepad pockets. Approved for industrial laundering. 
Certified to EN 1149 – antistatic protection, EN ISO 11611 – protection for welding and similar processes, EN 13034 – protection against liquid chemical splashes, EN ISO 11612 – protection against heat and flame, IEC 61482-2 – protection against thermal hazards of an electric arc, EN 14404 – protection for work in a kneeling position, OEKO-TEX® Standard 100 – tested for harmful substances.

Welding Trousers

Craftsman trousers in a slightly thinner 4-way stretch material that delivers the ultimate comfort. The trousers have a narrower fit and a tighter look. 
Bottom-opening knee pad pockets with CORDURA® stretch, detachable holster pockets, bellowed back pockets, ruler pocket and loop for hammer holder on both left and right sides.

Trousers

ToolRig™ Hi-Vis Trousers 4-Way Stretch

Trousers Stretch

ToolRig™ Service Trousers Stretch

Industrial Trousers Stretch

APC 2 Multinorm Inherent Trousers

Multinorm Inherent Trousers Stretch

Multinorm Inherent Trousers

Multinorm Inherent Trousers

APC 2 Multinorm Inherent Trousers

APC 2 Multinorm Inherent Trousers

Trousers Multinorm Inherent Stretch

Multinorm Inherent Trousers

Multinorm Inherent Trousers

Welding Trousers

Craftsman trousers 4-way Stretch